STATS
Modern Designs for a Modern World
 |
RoomSTATs come in numerous configurations that provide temperature display, setpoint adjustment, and command of system points. |
RoomSTAT-30 Series
RoomSTATs are high accuracy temperature sensors which come in a variety of configurations. Full graphical system access is available from the RoomSTAT when connected to a computer running Connect-2004.
|
|
Feature |
30 |
31 |
32 |
35 |
36 |
Basic temperature sensor |
 |
|
|
|
|
Setpoint |
|
|
|
||
2 wire output |
|||||
Override |
|
|
|
||
LED |
|
|
|
||
2 fixed function buttons |
|||||
3 fixed function buttons |
|
||||
1 line x 3½ character LCD display |
|
||||
Time display |
|
||||
SAC Inputs used |
1 |
2 |
2 |
0 |
1 |
MicroSTAT-20
| The MicroSTAT-20 allows programming of the 3 buttons, rotary knob, and the 3½ digit, 7 segment alpha/numeric display. The 20 and 21 have different addresses, allowing two MicroSTATs to be connected to a single SAC. |
I/O Bus RoomSTATs
I/O Bus RoomSTATs add I/O Bus communications to RoomSTATs. They are low-power modules that can be powered directly from the dual purpose I/O Bus communication wire.
I/O Bus RoomSTAT Features Comparison:
Feature |
30 |
31 |
32 |
35 |
36 |
Basic temperature sensor |
|
|
|
|
|
Setpoint |
|
|
|
||
Override (LED) |
|
|
|
||
2 Fixed function buttons |
|||||
3 Fixed function buttons |
|
||||
1 line x 3½ character LCD display |
|
||||
Time display |
|
DISPLAYS
System access where it's needed
Operator Control Displays
| The Operator Control Display (OCD) is a cost effective solution for changing or viewing control parameters.
All system points are accessible via the OCD, eliminating the need for a dedicated PC or laptop.
Using the intuitive menu structure, an operator can change setpoints, revise weekly schedules or command points.
The OCD displays system information on a 4 line by 20 character liquid crystal display. A system operator uses the buttons (Menu, Select and Enter) and a rotary switch for selecting and changing point values and weekly schedule times. The panel mount casing allows for easy installation into most mechanical tubs. |
SHUNT - 10K
| The SHUNT-10K is an adapter that allows 10K thermistors to be used with Walker SAC inputs. The adapter conditions the 10K thermistor range to match that of a 3K range without losing accuracy. |
Key features of the SHUNT-10K:
| Allows the use of 10K thermistors | Installs on any SAC input |
| Installs on any SAC input | Installs onto the input's T field header |